topic Re: SUSE Linux Ent 9 .252 kernel does not support SmartArray 5i drivers? in Operating System - Linux

SUSE Linux Ent 9 .252 kernel does not support SmartArray 5i drivers?

Eric Meiring — Fri, 24 Mar 2006 10:02:45 GMT

Hello again,
As mentioned in a previous thread, I have a Proliant DL360 G3 that I've installed SUSE Linux Ent 9 on recently. This server uses the SmartArray 5i.

I see on HP's support site for this server that there is an array controller driver for this OS, named cpq_cciss-2.6.10-11.sles9.i586.rpm.

Days ago, I went to install this and got a message stating that it failed, and that it is not supported by the .252 kernel which I am running.

Just recently, I wiped out all the hpasm/hprsm/etc packages, and reinstalled hpasm (due to another issue I resolved).

Now, going back to install the array controller driver, it tells me it's already installed!

Any guess as to what might have happened, and what I could do to verify that this driver is indeed installed now?

Thanks!

Re: SUSE Linux Ent 9 .252 kernel does not support SmartArray 5i drivers?

Jun Yu — Fri, 24 Mar 2006 12:43:08 GMT

Hi Eric,

SLES 9 with kernel 252 is up to date and should support your 5i controller very well. There is no need to install additional cciss driver from hp site.(252 is the latest errata kernel of SP3).

The driver hp provides is cpq_cciss-2.6.10-11.sles9.i586.rpm and could support their listed kernel 2.6.5-7.97
2.6.5-7.104
2.6.5-7.108
2.6.5-7.111.5
2.6.5-7.139
2.6.5-7.145
2.6.5-7.147
2.6.5-7.151
2.6.5-7.155.29
2.6.5-7.191 - (x86)

252 has more enhancement and bug fix so you can leave this drive alone.

Suppose you did install HP Proliant Support Pack that contains hpasm/hprsm/etc, ofcoz the driver you mentioned above is also included in this pack and will be installed into to the Linux with supported kernel.

you can check your cciss information by invoke rpm -qa|grep cciss or go to /proc/scsi/cciss/X and lspci for further verification.

JOe Yu

Re: SUSE Linux Ent 9 .252 kernel does not support SmartArray 5i drivers?

Eric Meiring — Fri, 24 Mar 2006 13:00:49 GMT

Thank you sir!

I think what might have happened is that something was in a muddled or not-quite-right state when it said .252 did not support it. (Or so I thought).

Now I do indeed see that the version I want is on there by using the rpm command you provided.

Knowing that this driver is updated anyway via the kernel update helps me understand.

Thanks!

Re: SUSE Linux Ent 9 .252 kernel does not support SmartArray 5i drivers?

Eric Meiring — Fri, 24 Mar 2006 13:02:51 GMT

Closing the thread since I have found the answer I seek.