topic Re: Proliant ML330 G# and RH3 rev4 install problem in Operating System - Linux

Proliant ML330 G# and RH3 rev4 install problem

Chris Swenson — Wed, 13 Jul 2005 15:46:49 GMT

I am running a clean install
This machine does not recognize its ide drive.
It has a CSA-6 Ultra 100 controller with a maxtor disk.
The smart start disk does not supply a driver.
Any ideas?
CS

Re: Proliant ML330 G# and RH3 rev4 install problem

Stuart Browne — Wed, 13 Jul 2005 16:41:10 GMT

I'm assuming that this 'CSA-6 Ultra' wasn't supplied with the server by HP?

Could I get some more details on what the 'CSA-6' actually is? I asumme it's some sort of SATA controller, but.. Who makes it? Is it a SATA RAID controller?

I was unable to find any concrete details about it, let alone know what driver you should use for it.

Re: Proliant ML330 G# and RH3 rev4 install problem

Vijay BK — Fri, 15 Jul 2005 02:23:58 GMT

Even I also faced same type of issue. I think RHEL 3 U4 installer doesn't have driver for that controller. We need to manually provide driver that.

RHEL 4 U1 and SLES 9 SP1 will recognize the ide drive and installation goes fine.