https://community.hpe.com/t5/operating-system-linux/etc-stinit-def-for-ultrium-2-on-red-hat-linux/m-p/3631353#M68991 sooooo, which settings do you need? everything seems to be ready to be used since all devices are detected. Mon, 26 Sep 2005 07:56:25 GMT dirk dierickx 2005-09-26T07:56:25Z https://community.hpe.com/t5/operating-system-linux/etc-stinit-def-for-ultrium-2-on-red-hat-linux/m-p/3631352#M68990 Hi, I am looking for stinit.def settings. We have a Sun Storedge L8 (ADIC Faststor 2) carousel with an HP Ultrium-2 SCSI Drive in it. I need settings in order to get Sun Enterprise Backup Software running. The compression should be enabled. <BR /><BR />-bash-2.05b# cat /proc/scsi/scsi <BR />Attached devices: <BR />Host: scsi0 Channel: 01 Id: 00 Lun: 00<BR /> Vendor: ADIC Model: FastStor 2 Rev: G12r<BR /> Type: Medium Changer ANSI SCSI revision: 02<BR />Host: scsi0 Channel: 01 Id: 05 Lun: 00<BR /> Vendor: HP Model: Ultrium 2-SCSI Rev: F53A<BR /> Type: Sequential-Access ANSI SCSI revision: 03<BR /><BR /><BR />Thank You!<BR />Jens Oberender Wed, 21 Sep 2005 09:31:11 GMT https://community.hpe.com/t5/operating-system-linux/etc-stinit-def-for-ultrium-2-on-red-hat-linux/m-p/3631352#M68990 Jens Oberender 2005-09-21T09:31:11Z https://community.hpe.com/t5/operating-system-linux/etc-stinit-def-for-ultrium-2-on-red-hat-linux/m-p/3631353#M68991 sooooo, which settings do you need? everything seems to be ready to be used since all devices are detected. Mon, 26 Sep 2005 07:56:25 GMT https://community.hpe.com/t5/operating-system-linux/etc-stinit-def-for-ultrium-2-on-red-hat-linux/m-p/3631353#M68991 dirk dierickx 2005-09-26T07:56:25Z