topic Re: Sarge on proliant 1600 in Operating System - Linux

Sarge on proliant 1600

Luis Franco Vázquez — Sun, 30 Oct 2005 15:01:42 GMT

Hi:
I´m trying to install a debian sarge on a proliant 1600 with 4 scsi of 9,1 GB (RAID 5).
I have some problems: first, the installer only detects a Compaq array of 18,2 gb and when I try to continue the installation (it´s a netinstall), the installer can´t reach the source over internet.
Anybody knows a guide or a document which could help me?

Re: Sarge on proliant 1600

Steven E. Protter — Mon, 31 Oct 2005 14:18:28 GMT

There is a boot disk for the proliant 1600.

You may need to boot off it and configure the disks again.

If thats not needed, see that the gateway address is good and pingable prior to the install.

SEP

Re: Sarge on proliant 1600

Luis Franco Vázquez — Mon, 31 Oct 2005 16:49:32 GMT

The hd are ok. I have used the smart start 5.5 and there is an array of 4 scsi disks, with one of them configured to be used as hot spare, so here there is no problem.

the problem are the network interfaces which doesnÂ´t work properly

Re: Sarge on proliant 1600

Luis Franco Vázquez — Tue, 01 Nov 2005 13:27:31 GMT

I have installed sarge on the server. I needed to install a smp kernel and now everything is ok.