https://community.hpe.com/t5/operating-system-linux/sytem-halted-no-input-data-on-mandrake-9-10/m-p/3493400#M69784 Hi,<BR /><BR />Client has a Ml 350 g2 loaded with mandrake 9.10. Installation goes 100%, but when it reboots it come up with a "sytem halted no input data" error &amp; just hangs there.<BR />Any one have any cluse what this means, or even whether its a hardware or software issue. BTW same client has anothet 350 with same installation running ok.<BR /><BR />Thanx,<BR />B Fri, 25 Feb 2005 06:01:21 GMT Black_3 2005-02-25T06:01:21Z https://community.hpe.com/t5/operating-system-linux/sytem-halted-no-input-data-on-mandrake-9-10/m-p/3493400#M69784 Hi,<BR /><BR />Client has a Ml 350 g2 loaded with mandrake 9.10. Installation goes 100%, but when it reboots it come up with a "sytem halted no input data" error &amp; just hangs there.<BR />Any one have any cluse what this means, or even whether its a hardware or software issue. BTW same client has anothet 350 with same installation running ok.<BR /><BR />Thanx,<BR />B Fri, 25 Feb 2005 06:01:21 GMT https://community.hpe.com/t5/operating-system-linux/sytem-halted-no-input-data-on-mandrake-9-10/m-p/3493400#M69784 Black_3 2005-02-25T06:01:21Z https://community.hpe.com/t5/operating-system-linux/sytem-halted-no-input-data-on-mandrake-9-10/m-p/3493401#M69785 Hi,<BR /><BR />You don't tell me what it does boot with but... most likely the kernel gets read and uncompressed. The uncompress routine does not find the end of compressed kernel sign.<BR /><BR />I suggest to replace the kernel by booting from an alternative media like cdrom.<BR /><BR />You have another identical system so the kernel can be copied from there...<BR /><BR />Regards,<BR />Bob Fri, 25 Feb 2005 10:20:46 GMT https://community.hpe.com/t5/operating-system-linux/sytem-halted-no-input-data-on-mandrake-9-10/m-p/3493401#M69785 B. Hulst 2005-02-25T10:20:46Z