https://community.hpe.com/t5/operating-system-linux/getting-errors-on-the-linux-enterprise-2-1-installed-on-compaq/m-p/3539740#M70241 Below attached are error messages received from a compaq DL380 servers,which have the linux enterprise 2.1 installed on them and are connected to the EVA 3000. Sat, 07 May 2005 01:19:46 GMT Ketan Gautam Sharma 2005-05-07T01:19:46Z https://community.hpe.com/t5/operating-system-linux/getting-errors-on-the-linux-enterprise-2-1-installed-on-compaq/m-p/3539740#M70241 Below attached are error messages received from a compaq DL380 servers,which have the linux enterprise 2.1 installed on them and are connected to the EVA 3000. Sat, 07 May 2005 01:19:46 GMT https://community.hpe.com/t5/operating-system-linux/getting-errors-on-the-linux-enterprise-2-1-installed-on-compaq/m-p/3539740#M70241 Ketan Gautam Sharma 2005-05-07T01:19:46Z https://community.hpe.com/t5/operating-system-linux/getting-errors-on-the-linux-enterprise-2-1-installed-on-compaq/m-p/3539741#M70242 Hi Ketan,<BR /><BR />Could you provide more information on your SAN topology. From the error messages, it seems that your device has been configured for an FC-AL (Fibre Channel Arbitrated Loop configuration) and hence multiple LIPs (Loop Initialisation Primitives)..it also finds one of your EVA 3000s as one of the loop nodes.<BR /><BR />I wonder if this is indeed your SAN setup, i.e. are you not using point-to-point or switched fabric topology?<BR /><BR />lets get more info on the plate and we can take it further...<BR /><BR />cheers. Sun, 08 May 2005 07:08:00 GMT https://community.hpe.com/t5/operating-system-linux/getting-errors-on-the-linux-enterprise-2-1-installed-on-compaq/m-p/3539741#M70242 SAKET_5 2005-05-08T07:08:00Z