topic Re: kernel panic on ze4101 in Operating System - Linux

kernel panic on ze4101

mike pelletier — Sun, 13 Oct 2002 16:30:15 GMT

when trying to install either mandrake 9 or redhat8, I get a kernel panic at the same sport, when its trying to detect pcmcia cards.. im thinking its because its one of the newer models with a newer chipset than is supported, but I need a confirmation of it..

Re: kernel panic on ze4101

dirk dierickx — Mon, 14 Oct 2002 04:47:18 GMT

as far as i know, mandrake always had problems with pcmcia cards during the install.
just leave you pcmcia cards out during the install, and insert them when the install is complete and you are going to boot for the first time.

Re: kernel panic on ze4101

mike pelletier — Mon, 14 Oct 2002 15:25:10 GMT

it kernel panics with or without pc cards installed

Re: kernel panic on ze4101

ne he — Sat, 26 Oct 2002 21:16:59 GMT

I got the same problem for ze4101.

How to deal with it?

When I tried to install RedHat7.1. I found the power adapter is too hot. And the I do not know how to configure the X-window. Text mode works okey. But I could not boot into XP. when I run /sbin/lilo it said "partition entry not found". When I tried to install Grub /sbin/grub-install /dev/hda it said no bios something. I forgot.

Any ideas thanks.

Re: kernel panic on ze4101

ne he — Sat, 26 Oct 2002 21:21:05 GMT

HI, mike pelletier

Are you there? did you figure out the ze4101? Could you please email me if you already figured out?

Thank you.
You may use my emailaddress:

letsgo2go2@yahoo.com

Re: kernel panic on ze4101

Steven Olsen — Wed, 30 Oct 2002 00:29:38 GMT

I have the same problem. I hope there will be a solution soon, or on the auction block she goes.

Re: kernel panic on ze4101

Jacek Pliszka — Wed, 30 Oct 2002 19:33:56 GMT

Hi!

I got the same problem. Trying Red Hat 7.3.

If someone knows how to deal with it please let me know:
pliszka@phyweb.ucr.edu

If not - I will have to return
it or sell it.

BR,

Jacek

Re: kernel panic on ze4101

Jacek Pliszka — Wed, 30 Oct 2002 19:44:44 GMT

OK, is kind of stupid to reply
5 minutes after my own post but..

In order to instlal Red Hat 73.
you need to give at the beginning linux nopcmcia option.

It allows to install but
it does not allow to use
PCMCIA.

BR,

Jacek

Re: kernel panic on ze4101

Jacek Pliszka — Wed, 30 Oct 2002 21:07:22 GMT

OK, again replying to my own popst. I got RH 7.3 runing.
No PCMCIA though.
Procedure:

1. install with
linux nopcmcia option given
at the beginning

2. during or after
installation give boot option
nomce

3. during or after installation
turn off pcmcia start on boot
through removing the
link from /etc/rc.d/rc5.d
or /etc/rc.d/rc3.d

BR,

Jacek

Re: kernel panic on ze4101

mike pelletier — Thu, 31 Oct 2002 00:05:28 GMT

well, the nopcmcia works, kinda anyway, now instead of getting that error; laptop freezes at the check cd windows

Re: kernel panic on ze4101

Jacek Pliszka — Thu, 31 Oct 2002 05:47:26 GMT

I can't say much more.
Works fine for me. And PCMCIA
should work with newest
pcmcia-cs. I've been just
watching "Friends" divx on it.
I also made a webpage:

http://www.fuw.edu.pl/~pliszka/hints/notebooks/ZE4101.html

Re: kernel panic on ze4101

Martin Tzanov — Thu, 31 Oct 2002 22:18:39 GMT

I have the same problem, when I try to install Red Har 7.2, 7.3, 8.0. I noticed that when computer crashes while initializing PC Card, there is a message, part of which is "bank 3".One can see that under memory in sys info from 3DMark there are realy 3 banks memory recognized. Also SiSoft Sandra doesn't give any information about memory banks, but it says " Disabled host controllers are present. Check BIOS". Probably we have BIOS problem.

Re: kernel panic on ze4101

mike pelletier — Thu, 31 Oct 2002 22:57:49 GMT

u can get by that message by using "linux nopcmcia" when starting the install

Re: kernel panic on ze4101

Yong Xi — Fri, 01 Nov 2002 05:39:29 GMT

Mike, the freeze problem is really not "freeze". It's actually the keyboard not responding. To install the system, you should specify "nousb" as well as "nopcmcia".

Also, after you have installed the system, before booting into the system. You should add a kernel option "noisapnp".

BTW, I have installed Redhat 7.3 and I can use the touchpad, even the scroll bar is working perfectly. But after I upgraded it to Redhat 8.0, the touchpad is still working but the scroll bar is not working any more. Anyone has any idea about that?

Also, I would like to try to add APM and PCMCIA support. Anyone could shine some information on that?

Thanks.

Re: kernel panic on ze4101

Crazzy — Fri, 01 Nov 2002 07:22:19 GMT

Jacek Pliszka, thanks a bunch for putting up all that useful info about Linux on laptops on your webpage. I found it very helpful, and will post your link to a couple other forums too.

Re: kernel panic on ze4101

Crazzy — Fri, 01 Nov 2002 07:25:07 GMT

Yong Xi,
I had a couple friends say that they used the latest pcmcia-cs kernel to get their pcmcia working under redhat 8.0. I haven't tried it out myself, but will let you know what happens when I do so.

Re: kernel panic on ze4101

Jacek Pliszka — Fri, 01 Nov 2002 08:12:48 GMT

Hi!

Well, I am during the tests
of newest stable kernel:
24.20-rc1 and newest stable pcmcia-cs-3.2.1. I will post
results to source forge
pcmcia forum here:

http://sourceforge.net/forum/forum.php?thread_id=757551&forum_id=7049

So far, nothing works and I tried quite a few things.

BR,

Jacek

Re: kernel panic on ze4101

Jacek Pliszka — Fri, 01 Nov 2002 08:19:25 GMT

OK,

I got reply from David Hinds
and it looks like it is faulty
BIOS so we have two ways:

1. Ask HP for fix

2. Ask Linux kernel people
for fix

David claims that problem lies
int he routing conflict - this
is relevant part of /proc/pci:

Intel ISA/OCU/CardBus PCIC probe:
PCI: Found IRQ 11 for device 00:0a.0
IRQ routing conflict for 00:0a.0, have irq 5, want irq 11
02Micro 0Z6912 rev 00 PCI-to_Cardbus at slot 00:0a, mem 0x80000000
host optos [0]: [pci/way] [pci irq 5] [lat 32/32] [bus 2/5]

HP people, if any of
you are reading this lists,
pleas respond/do something
about it. We are your
customers.

BR,

Jacek

Re: kernel panic on ze4101

Martin Tzanov — Sat, 02 Nov 2002 04:59:43 GMT

Did any of you succeeded in modem instalation?
I downloaded the driver from conexant.com link and it recognized the modem vendor and device, but when I try to run kppp it says "modem busy".

Re: kernel panic on ze4101

Jacek Pliszka — Mon, 11 Nov 2002 22:03:58 GMT

Do you all have O2Micro PCMCIA controller or problems are with
TI controller as well ???

I returned KA with O2Micro to store and ordered KB with TI.

To Ken Giusti: I can not
reply to your e-mail as my
e-mail to you
gets bounced with an error.
So if you want a reply - you need to give another e-mail address.

Short reply is: no,
there was no help from HP
at all. This quite unpleasant
as we want just a little - just PCMCIA working as
everything else does work.