topic diskless proliant ML370 g3 - SAN booting with secure path in Operating System - Linux

diskless proliant ML370 g3 - SAN booting with secure path

Bernd Schwarzkugler_1 — Fri, 30 Jan 2004 09:37:58 GMT

We would do the following:

A diskless proliant server with two hbas
(FCA 2214) should be able to boot from a MA8000
with securepath 3.0b enabled.

The linux distribution is SuSE SELS 8 with
service pack 2a.

We have success without Securepath.

But when securepath will be started at init
the system freezes :(

Anyone with tips or a running diskless server?

Re: diskless proliant ML370 g3 - SAN booting with secure path

Steven E. Protter — Fri, 30 Jan 2004 10:28:55 GMT

Is secure path certified with your hardware and SuSE release.

There needs to be drivers and those are OS specific. If you are off the certification Matrix, get back on and try again.

An example I'm familiar with.

Red Hat AS 2.1 is certified by HP with certain disk arrays and server combinations. That works. Take the same server and put Red Hat AS 3.0 on it and it does not work because HP doesn't have drivers that work yet on their servers.

SEP

Re: diskless proliant ML370 g3 - SAN booting with secure path

Bill Wood_3 — Fri, 30 Jan 2004 11:31:53 GMT

Please see our boot from SAN doc.

ftp://ftp.compaq.com/pub/products/storageworks/techdoc/san/AA-RV1AB-TE.pdf

Re: diskless proliant ML370 g3 - SAN booting with secure path

Bernd Schwarzkugler_1 — Mon, 02 Feb 2004 05:16:16 GMT

Is SecurePath supported on a diskless
server?

booting from san was not the point.

the problem is initrd and securepath.

Re: diskless proliant ML370 g3 - SAN booting with secure path

Bill Wood_3 — Mon, 02 Feb 2004 17:31:50 GMT

Sorry, I should have mentioned directly that the lack of Secure Path configuration info in the doc implies that it is not supported.

Re: diskless proliant ML370 g3 - SAN booting with secure path

Bernd Schwarzkugler_1 — Tue, 03 Feb 2004 02:57:01 GMT

Ok,

could i say the following to my customer:

SecurePath on a diskless Server is not
supportet at the time.
Please put the os on local scsi disks.

Re: diskless proliant ML370 g3 - SAN booting with secure path

Bill Wood_3 — Tue, 03 Feb 2004 09:05:44 GMT

Yes.