topic Re: settiong up v40 printer in Mwpis Linux in Operating System - Linux

settiong up v40 printer in Mwpis Linux

Tom Wiggins — Thu, 18 Mar 2004 10:32:04 GMT

Hi, I tried to setup my V40 to run in Linux and got the following results ;
I installed the drivers required that were in the Mepis install and also downloaded the driver from the Linux Drivers site. When doing the test print page, Linux says that the message has been sent to the printer. The printer liight flashes and the printer makes a clicking sound one time like it wants to pick up the paper, but doesn't touch the paper and the light continues to flash. The machine just does not do any printing.

The V40 works perfect on Win 98

Thanks for your input, Tom Wiggins

Re: settiong up v40 printer in Mwpis Linux

Martin P.J. Zinser — Thu, 18 Mar 2004 13:46:13 GMT

Hello Tom,

I suppose V40 is a supercharged version of the V8 vegetable juice ;-)

Seriously, can you please give a little more detail on your setup like a manufacturer name for the printer and the Linux distribution and version you are using?

Greetings, Martin

Re: settiong up v40 printer in Mwpis Linux

Tom Wiggins — Thu, 18 Mar 2004 19:12:00 GMT

Sorry about that. This A Hewlett Packard OfficeJet V40 All in one printer/fax/scanner.

I'm trying to use it on a Mepis Linux system.

Thanks, Tom

Re: settiong up v40 printer in Mwpis Linux

Martin P.J. Zinser — Thu, 18 Mar 2004 22:00:33 GMT

Hello Tom,

seems this should work, have a look at

http://www.linuxprinting.org/show_printer.cgi?recnum=HP-OfficeJet_V40

concerning installation details.

Greetings, Martin