topic Re: redhat 9 and support software in Operating System - Linux

redhat 9 and support software

Michael Banks_1 — Mon, 16 Jun 2003 12:55:48 GMT

Is there any way to get the csp to install on Redhat 9? Are there beta drivers for it? Really all I care about is the health driver and the instight agents so the fan in my ML370 G1 will run at the slower quieter speed.

Re: redhat 9 and support software

Jerome Henry — Mon, 16 Jun 2003 14:54:15 GMT

Are you talking about clustering CSP or sound CSP ?
J

Re: redhat 9 and support software

Michael Banks_1 — Mon, 16 Jun 2003 15:01:55 GMT

Sorry, probably have my acronyms wrong. CSP as in Compaq Support Software. I want to install the health and wellness drive + compaq insight agents and any other drivers that are need.

Re: redhat 9 and support software

Michael Banks_1 — Mon, 16 Jun 2003 15:05:54 GMT

I don't really care how it gets done, but I need the Fan on my ML370 to run slower and quiter. It is in my office, and with out the support software it is extremely loud. So, Beta, tricking the support install into thinking I am running Redhat 8. Doesn't really matter.

Any idea when Redhat 9 will be supported?

Re: redhat 9 and support software

Caesar_3 — Mon, 16 Jun 2003 18:33:38 GMT

Hello!

Only that i can think about is that HP for
today support RH so you can try to connect them and ask for drivers or about the status
of them.

Caesar

Re: redhat 9 and support software

Jerome Henry — Tue, 17 Jun 2003 04:42:30 GMT

I agree with Caesar,

I worked a bit on this idea of making csp think it's a redhat 8, but this means recompiling the kernel and modifying quite a lot of files, which could alos lead to problem when updating the system.

Recompiling csp for rh9 is not a hard thing, if you get the sources, and that's what HP has. The good idea is to ask them to do it.

J

Re: redhat 9 and support software

Michael Banks_1 — Tue, 17 Jun 2003 11:20:25 GMT

What's the easiest way to contact them to get the redhat9 stuff? Using the normal support methods or is there a forum?

Re: redhat 9 and support software

Jerome Henry — Tue, 17 Jun 2003 11:50:58 GMT

Normal support method.

On forums you'll have HP guys reading, but may not be the right guy at the right moment (you know the story).

Standard contact, and message is transmitted...

Good luck

J

Re: redhat 9 and support software

Michael Banks_1 — Wed, 18 Jun 2003 12:02:13 GMT

I called compaq and they weren't much help. They guy answering the phone didn't know anything about when it would be available or if I could get the source and make some rpms. I am going to try so other routes.

Re: redhat 9 and support software

Jerome Henry — Wed, 18 Jun 2003 13:51:00 GMT

Why not use their form ?
http://productfinder.support.hp.com/tps/ContactHp?h_lang=en&h_cc=us&
J

Re: redhat 9 and support software

Craig Gilmore — Wed, 18 Jun 2003 16:39:58 GMT

Michael,

I am an HP Support Employee working on getting better support for Linux from HP.

The CIM - Compaq Insight Manager is available for earlier versions of Redhat, as I am sure you are aware.

I would doubt that HP would provide source for CIM - at this time - to create your rpm's. The CIM is part of what makes support from HP worthwhile.

I'll be happy to investigate the timeframe for CIM on Redhat 9 from inside HP.

Should you have any questions you can reach me at craig.gilmore@hp.com.

Regards

CG

Re: redhat 9 and support software

Chris MacKenzie — Sun, 07 Sep 2003 23:02:06 GMT

I'm also after the health and wellness fan control - I have no need or interest in the other agents.

Is there any chance of HP releasing the fan control agent as a seperate open source project ?

Re: redhat 9 and support software

Chris MacKenzie — Sun, 07 Sep 2003 23:02:23 GMT

I'm also after the health and wellness fan control for RH v9.0 - I have no need or interest in the other agents.

Is there any chance of HP releasing the fan control agent as a seperate open source project ?