topic Re: DL360 G3 in Operating System - Linux

DL360 G3

Seva Feldman — Mon, 08 Sep 2003 08:38:47 GMT

Hi All,

The main problem that cdrom installed by default in this server can not be recognized by Linux 9 installation at boot sequence (I think this is a speed recognition problem). We had escalated this issue with HP, but no answer till now. Only solution we found was to change the existing drive with 360 G2 drive. Funny , but this works perfectly for us. Also we found that Norton Ghost bootable CD driver can not recognize CDROM speed and use x2 speed. Think about transfer 600MB image with x2 speed. I'm crying every time.. The quetion why should I buy 360G3 with this kind of BUG.

Re: DL360 G3

Vitaly Karasik_1 — Mon, 08 Sep 2003 11:44:33 GMT

Seva, [Privet & Shalom!]

This issue (DL360G3 & RHL 9) seems to be the most frequently asked question in this group.

RHL 9 isn't targeted to Proliants, I suggest you to use RHEL 2.1 for now and RHEL 3.0 from October.

See

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x7438648175aa5d449a1af50f62057642,00.html

for links

Regards,
Vitaly

Re: DL360 G3

Seva Feldman — Mon, 08 Sep 2003 13:12:51 GMT

Hi Vitaly!

Do you understand what is a meaning of you words - "RHL9 does not support Proliant server". As I remember RHL 9 is a linux kernel + installation process + a lot of RPMS. Linux is a operation system and words "advanced or enterprise" are only for preconfigured systems.
I need minimal installation with customized kernel to install with kickstart. So should I buy 1k Linux "server" :-(. May be Big Company named HP will check this issue and make upgrade for CDROM firmware ... maybe. If HP wants to have a big piece of Linux market cake they should work harder.

Regards.

Re: DL360 G3

Vitaly Karasik_1 — Mon, 08 Sep 2003 13:30:22 GMT

1) RHEL isn't 1K $$ software, it starting from $179 for RHEL WS

2) the bug, IMHO, is in RH9 kernel, check bugzilla

but again - RH & HP don't support such (RHL9 + Proliant) configuration [IMHO]

3) as far as I remember, there are few workarounds suggested in previous discussions - using non-CDROM install and so on

4) as far as I remember, RH7.x install works fine with 360G3

Re: DL360 G3

dirk dierickx — Tue, 09 Sep 2003 04:40:42 GMT

Since the poster mentioned that 'ghost' does not recognise this cdrom either, i think it is a much broader problem then just RH9.
I'm sure all those NT admins are not too happy about this, since ghost is a pretty important tool for them.
The solution could be something as simple as a firmware/bios upgrade from HP.

Re: DL360 G3

KristofH — Mon, 15 Sep 2003 10:44:04 GMT

OH well, at last, in the group found an answer and solution to the well-known "RH9 on Proliant" problem..

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x4b3739c827d6a54899d09152cebf36bd,00.html

Updated boot floppy can be downloaded. thanks to the original poster!

Cheers...