https://community.hpe.com/t5/operating-system-linux/ml370-g3/m-p/3057020#M76485 Hi,<BR /><BR />Have a look at the following link<BR /><BR /><A href="http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/install-guide/ch-bootopts.html" target="_blank">http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/install-guide/ch-bootopts.html</A><BR /><BR />as you see there are many option there, you best bet is noprobe.<BR /><BR />it go's like this ..<BR /><BR />after booting cd and before autoload type <BR /><BR />linux noprobe<BR /><BR />this may do the job, when I run into real problems on i386/AMD I usualy use knoppix cd to the rescue..<BR /><BR />also make sure your bio's and you adapter card is seen by hardware before attempting anything fancy.<BR /><BR />Hope this will get you up and running.<BR /><BR />Jean-Pierre<BR /><BR /><BR /><BR /> Wed, 27 Aug 2003 08:46:57 GMT Huc_1 2003-08-27T08:46:57Z https://community.hpe.com/t5/operating-system-linux/ml370-g3/m-p/3057019#M76484 <BR />I am having a problem getting into rescue mode with redhat 9.0 cd 1. Soon after it loads the aic7xxx driver it crashes. I believe there are problems with Redhat 9. Does Redhat 8 support Proliant ML370 G3 with the 641 Smart Array controller or is there a work around with Redhat 9? <BR /><BR />Please could anyone give me some pointers for the same. Help is greatly appreciated. Tue, 26 Aug 2003 17:09:04 GMT https://community.hpe.com/t5/operating-system-linux/ml370-g3/m-p/3057019#M76484 Sameer Kamat 2003-08-26T17:09:04Z https://community.hpe.com/t5/operating-system-linux/ml370-g3/m-p/3057020#M76485 Hi,<BR /><BR />Have a look at the following link<BR /><BR /><A href="http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/install-guide/ch-bootopts.html" target="_blank">http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/install-guide/ch-bootopts.html</A><BR /><BR />as you see there are many option there, you best bet is noprobe.<BR /><BR />it go's like this ..<BR /><BR />after booting cd and before autoload type <BR /><BR />linux noprobe<BR /><BR />this may do the job, when I run into real problems on i386/AMD I usualy use knoppix cd to the rescue..<BR /><BR />also make sure your bio's and you adapter card is seen by hardware before attempting anything fancy.<BR /><BR />Hope this will get you up and running.<BR /><BR />Jean-Pierre<BR /><BR /><BR /><BR /> Wed, 27 Aug 2003 08:46:57 GMT https://community.hpe.com/t5/operating-system-linux/ml370-g3/m-p/3057020#M76485 Huc_1 2003-08-27T08:46:57Z