topic Re: Linux Startup in Operating System - Linux

Linux Startup

Chad Rendell_1 — Thu, 03 Apr 2003 01:12:44 GMT

I am new to Linux as you will sone see. I just installed RH 7.0. How do I invoke the GUI?

Re: Linux Startup

John Poff — Thu, 03 Apr 2003 03:12:03 GMT

Hi,

You can start XWindows by giving the 'startx' command. But before you do that, you might want to run the 'Xconfigurator' command as root to make sure your graphics card is supported and that XWindows is configured for your hardware.

JP

Re: Linux Startup

Balaji N — Thu, 03 Apr 2003 03:52:15 GMT

hi,

welcome to the world of linux.

during the installtion did u configure X. if not you need to configure it manually. Run Xconfigurator. you will need details about ur display card and monitor. the manuals which came along with pc will be handy.

after this is done, run startx. it will start the gui. if you want to start the gui whenever the system boots, edit the /etc/inittab file and change the line

id:3:initdefault:

to look like

id:5:initdefault:

hth
-balaji