https://community.hpe.com/t5/operating-system-linux/hardware-raid-on-proliant-dl360/m-p/2964491#M77133 I have resolved the problem after:<BR /><BR />1. Rebuilt the array in BIOS level<BR />2. Installed Linux on first disk.<BR />3. Applied this RPM<BR />lsi-megaide-drvr-rh80-2.26e-1.i386.rpm<BR /><BR />Now Linux sees only one disk. Wed, 07 May 2003 04:38:52 GMT Sivasingam Santhakumar 2003-05-07T04:38:52Z https://community.hpe.com/t5/operating-system-linux/hardware-raid-on-proliant-dl360/m-p/2964490#M77132 We purchased HP Proliant DL360 with 80gb x 2 disks, 2.3ghz CPU &amp; 640mb ram. It has MegaRAID IDE 100 V 2.6 Raid utility to set up raids. I am trying to install RedHat 8 on it. <BR /><BR />1. Linux sees 2 disks rather one (as raid). <BR />2. Even after the linux installation(no <BR /> hazzle here) and the subcequecnt reboot <BR /> the system searching for boot disk (C:).<BR /><BR />Is there a special driver available? how can <BR />I install the driver (it cannot boot into <BR /> Linux) <BR />I need your assistant to solve the problem.<BR /><BR />Thanks in advance Fri, 02 May 2003 11:24:13 GMT https://community.hpe.com/t5/operating-system-linux/hardware-raid-on-proliant-dl360/m-p/2964490#M77132 Sivasingam Santhakumar 2003-05-02T11:24:13Z https://community.hpe.com/t5/operating-system-linux/hardware-raid-on-proliant-dl360/m-p/2964491#M77133 I have resolved the problem after:<BR /><BR />1. Rebuilt the array in BIOS level<BR />2. Installed Linux on first disk.<BR />3. Applied this RPM<BR />lsi-megaide-drvr-rh80-2.26e-1.i386.rpm<BR /><BR />Now Linux sees only one disk. Wed, 07 May 2003 04:38:52 GMT https://community.hpe.com/t5/operating-system-linux/hardware-raid-on-proliant-dl360/m-p/2964491#M77133 Sivasingam Santhakumar 2003-05-07T04:38:52Z