topic Re: Apache config from the ground up!! in Operating System - Linux

Apache config from the ground up!!

roadrunner_1 — Sun, 15 Dec 2002 07:57:53 GMT

I have installed apache and I cant get the daemon to start and i get a message
ERROR: could not start daemon

Can anyone tell me the correct way to start this daemon and the configuration files to be edited so that I can get this web server up and running...

POINTS will be assigned for all answers responded..

Re: Apache config from the ground up!!

Schelstraete Bart_1 — Sun, 15 Dec 2002 09:06:56 GMT

I'm afraind we don't have enoguh information to help you.
*) What Apache version? 1.3.X? or 2.X?
*) Can you tell us what error message you received in the error_log? (probably in the /var/log/httpd directory)
*) If there are no special error messages in that logfile, try increasing the debuglevel. You can change that by editing your httpd.conf file:

###
LogLevel debug
###

rgrds,

Bart

Re: Apache config from the ground up!!

Dirk Ossenbrueggen — Mon, 16 Dec 2002 09:59:17 GMT

Usually there is a tool called apachectl to start and stop apache.
- Edit your httpd.conf (in /etc/httpd or /etc/apache) to fit your needs. For the first start up there is not very much to edit. Make sure no other process is listening on your server port (default 80), set the server name.
- Run 'apachectl start' from the command line.
- Check error_log (usually in /var/log/httpd) for errors.
- Also check /var/log/messages for httpd errors.

Hope this helps, if not, please provide the error messages from error_log and /var/log/messages.
And by the way, what Linux are you running ?

Re: Apache config from the ground up!!

Chakravarthi — Thu, 19 Dec 2002 08:25:13 GMT

Hi,

check the following link

http://www.e-gineer.com/instructions/install-apache1xx-on-linux.phtml

regards
chakri