topic RedHat 8.0 install on xe4400 in Operating System - Linux

RedHat 8.0 install on xe4400

Tarjei Knapstad — Mon, 06 Jan 2003 11:49:45 GMT

One of my colleagues recently purchased an Omnibook xe4400 and wanted to install RH8.0 on it. However, when I try to boot the network install disk everything locks up on the first prompt (language selection). I've tried both graphical and text install just for a laugh, but it seems that either the keyboard is not recognized, or it freezes for some other reason.

Can anyone help?

Re: RedHat 8.0 install on xe4400

Cristian Draghici — Tue, 07 Jan 2003 10:57:07 GMT

Hi there,

There is a usb related issue at least with XE4500.

So you must specify "linux nousb idebus=66" when prompted to choose the install mode. (where you would normally press Enter).

With 7.3 at least, the ide bus speed can't be detected, that's why the idebus parameter was needed. I'm not sure about 8.0 but I used the parameters above on a 4500 and all worked fine.

See
http://www.net42.co.uk/linux8-on-xe4500.shtml
for a redhat 8 on a xe4500 install guide. (i imagine 4400 and 4500 are similar).

Cheers
c

Re: RedHat 8.0 install on xe4400

Hugo_14 — Tue, 07 Jan 2003 23:08:09 GMT

Hello

I install suse 8.1, slackware 8.1 and gentoo 1.4 on Omnibook xe4400. Just type "linux ide0=0x1f0,0x3f6,14 idebus=66" when prompted to choose the install mode.

Regards Hugo