topic Re: X config problem on 845 chpiset in Operating System - Linux

X config problem on 845 chpiset

Subrata Bal — Mon, 06 Jan 2003 08:52:23 GMT

Hi,

I am having problem in getting the display for my PC. This PC have P$ TITAN 667 (GA-8GE667 Pro, Intel 845GE chipset) mother board and have a built in display card. I have gone through the messeges of X V. Bindumadhava on similar problem and corresponding replies by Kodjo Aqbenu. And tried to modify the XF86Config-4 file changing the Driver "vesa".
But I still have problem.
I get the display for few seconds after booitng, but after that it disappears to give a black screen. I should mention the screen i am using is Sharp LL-T1530A
and have maximum resolution of 1024x768. i am attaching 1) the result of lspci -v
2) file /etc/X11/XF86Config-4
3) file /var/log/XFree86.0.log

can any one please help me in this regard.

Thanking you in advance.

regards
Subrata

Re: X config problem on 845 chpiset

Chakravarthi — Mon, 06 Jan 2003 11:46:13 GMT

linux version ?????

Re: X config problem on 845 chpiset

Subrata Bal — Tue, 07 Jan 2003 02:20:55 GMT

Dear Mr/Mrs. Chakravarthi,

Thanks for your prompt reply. I am sorry that I fotgot to metion that I am using Redhat Linux 7.2 in my earlier mail.

Thank you again,

Best regards,

Subrata

Re: X config problem on 845 chpiset

Kelli Ward — Wed, 08 Jan 2003 23:29:12 GMT

Hi Subrata,

Have you tried to use the Xconfigurator command to probe your graphics?

It might help you,

Good luck,
Kel

Re: X config problem on 845 chpiset

John Meissner — Thu, 09 Jan 2003 18:31:48 GMT

Have you downloaded an updated linus driver for your video card? A friend of mine had a similar problem with this. He also had a problem that after a while his screen would go black. It turns out that Dell had to replace his video card/motherboard in his laptop.

Re: X config problem on 845 chpiset

Subrata Bal — Thu, 09 Jan 2003 23:52:12 GMT

I have tried Xconfigarator. But it did not help. I have n't updated the linux driver for my video card. Actually this chips seems to be very new. And I dont know wheather linux driver for this Intel 845 GE is available or not. In case any one knows about it please let me know.

Thanks

Best regards

Subrata

Re: X config problem on 845 chpiset

Stuart Browne — Fri, 10 Jan 2003 00:59:58 GMT

From a bit of reasearch, it seems that there are 2 related issues with this series of video card.

One is detailed here:

http://support.intel.com/support/graphics/intel845g/linux.htm

This basically states what was mentioned in the other thread of this topic (use the 'vesa' driver). It also states that newer versions of XFree86 include peliminary support for the 845 in the 'i810' driver.

The second issue has to do with various BIOS' bad habbit of forcing a 1MB buffer on the card, meaning you can't use any decent resolutions. Changing this in the BIOS to be 8MB or so usually fixes this problem, but you may also need to force the X config to see that it has that much memory (in the video device, the setting 'VideoRam'). This is discussed in the thread:

http://www.experts-exchange.com/Operating_Systems/X_Windows/Q_20388129.html

(note: most of the stuff in this thread is garbage, but there's a few posts which are decent).

Depending on what distribution you are using (haven't seen it mentioned in either thread thus far), and how well you can cope with updating packages, you might want to try updaing both the Kernel (to 2.4.20) and X (to the pre-release 4.2.99.3).

These latest releases have a number of fixes in place for the intel 845 video chipset.

Hope this helps somewhat.