ehternet card and linux on 8770C

Veera Venkataramani — Sun, 30 Dec 2001 07:57:36 GMT

I installed red hat 7.0 on my 8770C.

I use verizon DSL with my windows. I want to use DSL with linux. However, it looks like the BIOS is configured as PnP enabled and so it wont tell the OS about the ethernet card. Iam not able to toggle this feature of the BIOS.

(prompt) > ifconfig eth0

gives an error saying Device not found.

From the output of lspci
[snip]
00:0f.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
Subsystem: Hewlett-Packard Company: Unknown device 9207
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1400
Region 1: Memory at f4000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[snip]

Can anyone tell me if anyone has been able to get the ethernet card of the 8770C to work with linux?

Thanks.

Re: ehternet card and linux on 8770C

I_M — Tue, 01 Jan 2002 07:27:36 GMT

Hi

You may want to try the latest driver.
http://sourceforge.net/projects/gkernel/
8139too driver

Regards,

topic Re: ehternet card and linux on 8770C in Operating System - Linux

ehternet card and linux on 8770C

Re: ehternet card and linux on 8770C