https://community.hpe.com/t5/operating-system-linux/model/m-p/2466035#M79889 Is there an equivalent command in Linux similar to HP-UX model command which prints detailed hardware model information?????<BR /><BR />thanks Mon, 20 Nov 2000 19:53:53 GMT f. halili 2000-11-20T19:53:53Z https://community.hpe.com/t5/operating-system-linux/model/m-p/2466035#M79889 Is there an equivalent command in Linux similar to HP-UX model command which prints detailed hardware model information?????<BR /><BR />thanks Mon, 20 Nov 2000 19:53:53 GMT https://community.hpe.com/t5/operating-system-linux/model/m-p/2466035#M79889 f. halili 2000-11-20T19:53:53Z https://community.hpe.com/t5/operating-system-linux/model/m-p/2466036#M79890 Hi,<BR /><BR />You could try <BR /><BR /># cat /proc/cpuinfo<BR />processor : 0<BR />vendor_id : GenuineIntel<BR />cpu family : 6<BR />model : 6<BR />model name : Mobile Pentium II<BR />stepping : 10<BR />cpu MHz : 400.020089<BR />cache size : 256 KB<BR />fdiv_bug : no<BR />hlt_bug : no<BR />sep_bug : no<BR />f00f_bug : no<BR />coma_bug : no<BR />fpu : yes<BR />fpu_exception : yes<BR />cpuid level : 2<BR />wp : yes<BR />flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr<BR />bogomips : 398.95<BR /><BR />A lot of information, isn't it??<BR /><BR />Hope this helps,<BR />Rik.<BR /> Mon, 20 Nov 2000 21:32:36 GMT https://community.hpe.com/t5/operating-system-linux/model/m-p/2466036#M79890 RikTytgat 2000-11-20T21:32:36Z