https://community.hpe.com/t5/operating-system-linux/proxy-server-for-remote-networks/m-p/2508915#M80122 Well first lets start with your squid.conf --<BR /><BR />http_port ????<BR /><BR />Add an acl for you group:<BR />acl <NAME> src 10.1.1.15-10.1.1.30/255.0.0.0<BR /><BR />range from - range to/mask<BR /><BR />http_access allow <NAME><BR /><BR />Make sure the http_access comes before "http_access deny all".<BR />Then just restart squid...<BR />you should now be able to set proxy settings on another machine to this one.<BR /><BR />email: huffma@dor.state.fl.us<BR /></NAME></NAME> Thu, 05 Apr 2001 13:53:41 GMT Mark Huff II 2001-04-05T13:53:41Z https://community.hpe.com/t5/operating-system-linux/proxy-server-for-remote-networks/m-p/2508914#M80121 Hi,<BR /> I Installed squid in my Linux Gateway.<BR />Using this IP Address my branch people (where they located in another place)want to access my internet bandwidth..<BR />Plx anybody help me out<BR />regds<BR />Mohan P Fri, 23 Mar 2001 07:46:03 GMT https://community.hpe.com/t5/operating-system-linux/proxy-server-for-remote-networks/m-p/2508914#M80121 Mohan_4 2001-03-23T07:46:03Z https://community.hpe.com/t5/operating-system-linux/proxy-server-for-remote-networks/m-p/2508915#M80122 Well first lets start with your squid.conf --<BR /><BR />http_port ????<BR /><BR />Add an acl for you group:<BR />acl <NAME> src 10.1.1.15-10.1.1.30/255.0.0.0<BR /><BR />range from - range to/mask<BR /><BR />http_access allow <NAME><BR /><BR />Make sure the http_access comes before "http_access deny all".<BR />Then just restart squid...<BR />you should now be able to set proxy settings on another machine to this one.<BR /><BR />email: huffma@dor.state.fl.us<BR /></NAME></NAME> Thu, 05 Apr 2001 13:53:41 GMT https://community.hpe.com/t5/operating-system-linux/proxy-server-for-remote-networks/m-p/2508915#M80122 Mark Huff II 2001-04-05T13:53:41Z