https://community.hpe.com/t5/operating-system-linux/linux-running-on-an-netserver-e50-w-ide-drives/m-p/2498014#M80273 I did some looking on google and and I found this link...<BR /><BR /><A href="http://sdb.suse.de/sdb/en/html/kgw_lilo_errmsg.html" target="_blank">http://sdb.suse.de/sdb/en/html/kgw_lilo_errmsg.html</A><BR /><BR />It states that if you only get the first L it indicates some sortof media or geometry mismatch error.<BR /><BR />Hope that helps. Tue, 22 May 2001 14:05:46 GMT Timothy Keller 2001-05-22T14:05:46Z https://community.hpe.com/t5/operating-system-linux/linux-running-on-an-netserver-e50-w-ide-drives/m-p/2498013#M80272 I am trying to get a NetServer E50 to boot with linux redhat 7.0. I have two ide drives on the system. I am not sure if I have removed all plug and play issue from the bios. I can see the drives durring installation. However, when I try to boot the system from the hard disks, it seems to hang with an "L" in the upper left corner. I am thinking something is missconfigured in bios. Any help please. Sat, 24 Feb 2001 23:03:10 GMT https://community.hpe.com/t5/operating-system-linux/linux-running-on-an-netserver-e50-w-ide-drives/m-p/2498013#M80272 Mark Crabb 2001-02-24T23:03:10Z https://community.hpe.com/t5/operating-system-linux/linux-running-on-an-netserver-e50-w-ide-drives/m-p/2498014#M80273 I did some looking on google and and I found this link...<BR /><BR /><A href="http://sdb.suse.de/sdb/en/html/kgw_lilo_errmsg.html" target="_blank">http://sdb.suse.de/sdb/en/html/kgw_lilo_errmsg.html</A><BR /><BR />It states that if you only get the first L it indicates some sortof media or geometry mismatch error.<BR /><BR />Hope that helps. Tue, 22 May 2001 14:05:46 GMT https://community.hpe.com/t5/operating-system-linux/linux-running-on-an-netserver-e50-w-ide-drives/m-p/2498014#M80273 Timothy Keller 2001-05-22T14:05:46Z