https://community.hpe.com/t5/operating-system-linux/hp-brio-on-suse-6-2/m-p/2415731#M80607 Hi Richard,<BR /><BR /> I take it you have a model D6646A which ships with an ATI Rage Pro <BR />graphics chip. SuSE 6.2 comes with XFree 3.3.4 which should work well with the <BR />Mach64 based Rage Pro. Are you using xf86config or XF86Setup? Does the <BR />monitor go blank as soon as you start the setup utility? Also, what is is <BR />product number on the back of your monitor? Fri, 29 Oct 1999 06:24:44 GMT Patrick Watts_1 1999-10-29T06:24:44Z https://community.hpe.com/t5/operating-system-linux/hp-brio-on-suse-6-2/m-p/2415730#M80606 Can someone from HP help me out with this problem?<BR />Try to install SuSE 6.2 on HP BRIO Pentium III 450 with 128MB. Which is a <BR />breeze however when I try to install the Xwindows then the monitor go blank and <BR />all the green dot light up like a chrismast tree...BTW it used HP 55 series <BR />(15")<BR /><BR />Any idea would be appreciated. Fri, 29 Oct 1999 03:29:13 GMT https://community.hpe.com/t5/operating-system-linux/hp-brio-on-suse-6-2/m-p/2415730#M80606 Richard Tirtadji 1999-10-29T03:29:13Z https://community.hpe.com/t5/operating-system-linux/hp-brio-on-suse-6-2/m-p/2415731#M80607 Hi Richard,<BR /><BR /> I take it you have a model D6646A which ships with an ATI Rage Pro <BR />graphics chip. SuSE 6.2 comes with XFree 3.3.4 which should work well with the <BR />Mach64 based Rage Pro. Are you using xf86config or XF86Setup? Does the <BR />monitor go blank as soon as you start the setup utility? Also, what is is <BR />product number on the back of your monitor? Fri, 29 Oct 1999 06:24:44 GMT https://community.hpe.com/t5/operating-system-linux/hp-brio-on-suse-6-2/m-p/2415731#M80607 Patrick Watts_1 1999-10-29T06:24:44Z