https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458322#M80902 are devices attached to it seen or does it just not show up in the SCSI banner? if it's not recognized at all you might try to re-flash it (new or old bios/fw). <BR />An other possibility, less likely, is that it's settings changed. See if you need to enable bios or banner<BR /> Fri, 27 Oct 2000 06:28:50 GMT GerardDijkstra 2000-10-27T06:28:50Z https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458321#M80901 I flashed my Dac960PL - 3 controller with a new firmware/bios update and now it ins?t seen during the system boot.<BR />How i over-ride the rom bios and flash controller again. Which JP I need remove ? Thu, 26 Oct 2000 16:33:52 GMT https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458321#M80901 X_2 2000-10-26T16:33:52Z https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458322#M80902 are devices attached to it seen or does it just not show up in the SCSI banner? if it's not recognized at all you might try to re-flash it (new or old bios/fw). <BR />An other possibility, less likely, is that it's settings changed. See if you need to enable bios or banner<BR /> Fri, 27 Oct 2000 06:28:50 GMT https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458322#M80902 GerardDijkstra 2000-10-27T06:28:50Z https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458323#M80903 I try flashed bios again, but aplication returned "The adapter controller not Found".<BR />I check Slot and cables, Ok ! Fri, 27 Oct 2000 08:51:56 GMT https://community.hpe.com/t5/operating-system-linux/mylex-dac960pl-3/m-p/2458323#M80903 X_2 2000-10-27T08:51:56Z