https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260761#M83701 It should be the same as on previous RHEL versions.<BR /><BR /><A href="http://www.redhat.com/docs/manuals/enterprise/RHEL-3-Manual/ref-guide/s1-networkscripts-interfaces.html#S2-NETWORKSCRIPTS-INTERFACES-CHAN" target="_blank">http://www.redhat.com/docs/manuals/enterprise/RHEL-3-Manual/ref-guide/s1-networkscripts-interfaces.html#S2-NETWORKSCRIPTS-INTERFACES-CHAN</A> Sun, 31 Aug 2008 07:40:41 GMT Alexander Chuzhoy 2008-08-31T07:40:41Z https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260760#M83700 Hi,<BR />How do i configure(Step by Step) bonding/teamming in RHEL5?<BR />Is there any docs for bonding in RHEL5?<BR /><BR />Thanks;<BR /> Sun, 31 Aug 2008 04:08:22 GMT https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260760#M83700 txtraz 2008-08-31T04:08:22Z https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260761#M83701 It should be the same as on previous RHEL versions.<BR /><BR /><A href="http://www.redhat.com/docs/manuals/enterprise/RHEL-3-Manual/ref-guide/s1-networkscripts-interfaces.html#S2-NETWORKSCRIPTS-INTERFACES-CHAN" target="_blank">http://www.redhat.com/docs/manuals/enterprise/RHEL-3-Manual/ref-guide/s1-networkscripts-interfaces.html#S2-NETWORKSCRIPTS-INTERFACES-CHAN</A> Sun, 31 Aug 2008 07:40:41 GMT https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260761#M83701 Alexander Chuzhoy 2008-08-31T07:40:41Z https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260762#M83702 Shalom,<BR /><BR />The configuration files vary a bit depending on the type of network cards.<BR /><BR />Major components.<BR /><BR />/etc/modprobe.conf<BR /><BR />alias bond0 bonding<BR />options bond0 miimon=200 mode=active-backup<BR />alias eth0 bnx2<BR />alias eth1 bnx2<BR />alias scsi_hostadapter cciss<BR />alias scsi_hostadapter1 ata_piix<BR />alias scsi_hostadapter2 qla2xxx<BR />~ <BR /><BR />bond0 config<BR /><BR />[root@acropolis ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0 <BR />DEVICE=bond0<BR />BOOTPROTO=static<BR /># HWADDR=00:14:5E:30:32:B2<BR />IPADDR=10.63.32.49<BR />NETMASK=255.255.255.0<BR />ONBOOT=yes<BR />TYPE=Bonding<BR />BOOTPROTO=none<BR />USERCTL=no<BR /><BR /><BR />eth0<BR />[root@acropolis ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0<BR />DEVICE=eth0<BR />ONBOOT=yes<BR />MASTER=bond0<BR />SLAVE=yes<BR />BOOTPROTO=none<BR />USERCTL=no<BR /><BR />eth1<BR />[root@acropolis ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0<BR />DEVICE=eth1<BR />ONBOOT=yes<BR />MASTER=bond0<BR />SLAVE=yes<BR />BOOTPROTO=none<BR />USERCTL=no<BR /><BR />service network restart.<BR /><BR />SEP Sun, 31 Aug 2008 11:50:34 GMT https://community.hpe.com/t5/operating-system-linux/bonding-configuration/m-p/4260762#M83702 Steven E. Protter 2008-08-31T11:50:34Z