topic copy hp/ux image 11.00 to a new disk in Operating System - Linux

copy hp/ux image 11.00 to a new disk

Jan Studsgaard_2 — Thu, 20 Jan 2005 06:13:01 GMT

I need to make tree new hp/ux 11.00 installations.
When I made the first one I will copy the image too the next disk.
I know I have to change the network settings afterwards.
Can any one explain me how I do this if the harddrives is installed on the same workstation.
It is a king off partion copy.
Best regards
Jan Studsgaard.

Re: copy hp/ux image 11.00 to a new disk

Slawomir Gora — Thu, 20 Jan 2005 07:17:00 GMT

Hi,
if you have streamer you can make ignite boot tape and boot from it.

If not you can boot from cd and use dd command
to copy disks:

dd if=/dev/rdsk/src_disk of=/dev/rdsk/dst_disk bs=4M

Re: copy hp/ux image 11.00 to a new disk

Jan Studsgaard_2 — Thu, 20 Jan 2005 07:28:54 GMT

Hi,
What did you mean with streamer.
If I boot from cd I need a burner off course, but I donÂ´t have any burner.
If I had a burner will that be the best solution.
Can I do it from the network if I use Ignite.
I have no expirence with Ignite...it is the best way to do it

Re: copy hp/ux image 11.00 to a new disk

Slawomir Gora — Thu, 20 Jan 2005 08:09:24 GMT

Hi,

streamer it is tape device (DAT24,DAT40,DAT72, SDLT...)

Look at ignite doc about cloning systems:

http://docs.hp.com/en/B2355-90849/ch02s02.html
http://docs.hp.com/en/B2355-90849/ch09s12.html

Re: copy hp/ux image 11.00 to a new disk

Jan Studsgaard_2 — Thu, 20 Jan 2005 08:22:06 GMT

I will try now.
Thanks!!!
Jan Studsgaard