https://community.hpe.com/t5/operating-system-linux/redhat-7-3-vmware-1-5-2-nic-spped-on-dl380-g3/m-p/3073454#M87472 which driver do you use?<BR /><BR />in fact, you can set 100-FD for most NICs using mii-tool and/or ethool, but if you want to use your Ethernet module parameters we need to know which driver (kernel module) do you use for NICs.<BR /><BR />regards,<BR />Vitaly Thu, 18 Sep 2003 06:57:06 GMT Vitaly Karasik_1 2003-09-18T06:57:06Z https://community.hpe.com/t5/operating-system-linux/redhat-7-3-vmware-1-5-2-nic-spped-on-dl380-g3/m-p/3073453#M87471 I have a VMWare ESX 1.5.2 server running on a DL380 G3. I have NC7770 and NC7781 NICs. How do I force the physical NICs to 100/full? I know how to do set it on the virtual NICs in the VMWare GUI console but need to know how to do it in the kernel. Thank you! Wed, 17 Sep 2003 15:06:57 GMT https://community.hpe.com/t5/operating-system-linux/redhat-7-3-vmware-1-5-2-nic-spped-on-dl380-g3/m-p/3073453#M87471 Kevin Stamper 2003-09-17T15:06:57Z https://community.hpe.com/t5/operating-system-linux/redhat-7-3-vmware-1-5-2-nic-spped-on-dl380-g3/m-p/3073454#M87472 which driver do you use?<BR /><BR />in fact, you can set 100-FD for most NICs using mii-tool and/or ethool, but if you want to use your Ethernet module parameters we need to know which driver (kernel module) do you use for NICs.<BR /><BR />regards,<BR />Vitaly Thu, 18 Sep 2003 06:57:06 GMT https://community.hpe.com/t5/operating-system-linux/redhat-7-3-vmware-1-5-2-nic-spped-on-dl380-g3/m-p/3073454#M87472 Vitaly Karasik_1 2003-09-18T06:57:06Z