https://community.hpe.com/t5/operating-system-linux/ipv6-ipv4/m-p/3150194#M87716 Hi all,<BR />who has experiences in building up an scenario<BR />using both protocol-stacks? (V4/V6)<BR />I have tried to use nat-pt (KANE-Project), but I have had problems by installing this. I´ve heard about working scenarios using FreeBSD, but I do not know how it works properly.<BR />Which kind of Kernel-patching is necessary, how<BR />to get nat-pt properly at work.<BR /><BR />Additional scenario problem is to use bind9<BR />in both protocol stacks (V4 and V6), who has experiences in this subject.<BR />How I can authenticate differently Lan-connections using V4 or V6 stacks with the Radius-Protocol (Freeradius).<BR />Give me some hints please.<BR />Thank you for your engagement.<BR />sincerely Herbert Sat, 20 Dec 2003 14:21:47 GMT Werner_15 2003-12-20T14:21:47Z https://community.hpe.com/t5/operating-system-linux/ipv6-ipv4/m-p/3150194#M87716 Hi all,<BR />who has experiences in building up an scenario<BR />using both protocol-stacks? (V4/V6)<BR />I have tried to use nat-pt (KANE-Project), but I have had problems by installing this. I´ve heard about working scenarios using FreeBSD, but I do not know how it works properly.<BR />Which kind of Kernel-patching is necessary, how<BR />to get nat-pt properly at work.<BR /><BR />Additional scenario problem is to use bind9<BR />in both protocol stacks (V4 and V6), who has experiences in this subject.<BR />How I can authenticate differently Lan-connections using V4 or V6 stacks with the Radius-Protocol (Freeradius).<BR />Give me some hints please.<BR />Thank you for your engagement.<BR />sincerely Herbert Sat, 20 Dec 2003 14:21:47 GMT https://community.hpe.com/t5/operating-system-linux/ipv6-ipv4/m-p/3150194#M87716 Werner_15 2003-12-20T14:21:47Z https://community.hpe.com/t5/operating-system-linux/ipv6-ipv4/m-p/3150195#M87717 You have to enable both IPv4 and IPv6 support and re-compile your kernel. You can use a tunnel broker service from Freenet6 and enable IPv6 routing services using `radvd'. There are IPv6 bind9 and other packages. You should get the IPv6 enabled packages of xtradius to setup radiusd authentication. Sun, 21 Dec 2003 10:16:51 GMT https://community.hpe.com/t5/operating-system-linux/ipv6-ipv4/m-p/3150195#M87717 Ragu_1 2003-12-21T10:16:51Z