https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927656#M89105 You can pass flags when loading the module like this:<BR /><BR />insmod eepro100.o debug=1 options=0x100,0,0x20<BR /><BR />The eepro100 is a thrd party driver, the Intel e100 can accept the same types of flags. Search thier site or Gogle for linux tuning. <BR /><BR />For the most part all these are set to aut-negotiate. The only time I have used these was with flakey Cisco IOS flapping the switch, and I locked in the speeds in the IOS and on the Linux servers. Sat, 15 Mar 2003 20:18:23 GMT Jon_87 2003-03-15T20:18:23Z https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927655#M89104 How do you change the NIC settings on internal NIC for DL380 G3 running Mandrake 9.0? Fri, 14 Mar 2003 16:16:56 GMT https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927655#M89104 Robert Tidwell 2003-03-14T16:16:56Z https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927656#M89105 You can pass flags when loading the module like this:<BR /><BR />insmod eepro100.o debug=1 options=0x100,0,0x20<BR /><BR />The eepro100 is a thrd party driver, the Intel e100 can accept the same types of flags. Search thier site or Gogle for linux tuning. <BR /><BR />For the most part all these are set to aut-negotiate. The only time I have used these was with flakey Cisco IOS flapping the switch, and I locked in the speeds in the IOS and on the Linux servers. Sat, 15 Mar 2003 20:18:23 GMT https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927656#M89105 Jon_87 2003-03-15T20:18:23Z https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927657#M89106 Try the command mii-tool (RH 8 ). Read the man pages is your NIC are supported.<BR /><BR />[root@]# mii-tool <BR />eth0: no autonegotiation, 10baseT-HD, link ok<BR />[root@]# <BR /> Mon, 17 Mar 2003 12:57:45 GMT https://community.hpe.com/t5/operating-system-linux/nic-settings/m-p/2927657#M89106 Dusan Krasa 2003-03-17T12:57:45Z