topic Re: i bought a router recently, i can't telnet from outside in Operating System - Linux

i bought a router recently, i can't telnet from outside

eugene_6 — Sat, 08 Dec 2001 02:48:26 GMT

hi..

i got a router recenty
it's linksys etherfast wireless access point + cable/dsl router with 4 port switch

now i have only one computer connected to it.

i used to have 24.***.***.***
address,
now when i do ifconfig
i got this..192.168.1.***
seems like , router assigned that number to my nic card..
so i can't telnet from outside..

i would appreciate your help..

thanks
Eugene

Re: i bought a router recently, i can't telnet from outside

eugene_6 — Sat, 08 Dec 2001 07:22:32 GMT

some info about my system..

mandrake8.1
using dhcpcd for RR cable

i did use telnet before using router,

thank you........

Re: i bought a router recently, i can't telnet from outside

Santosh Nair_1 — Sat, 08 Dec 2001 10:59:28 GMT

You can access the router's configurations using a web browser and accessing http://192.168.1.1. The default password is admin (no username).

By default the l`inksys router assigns IP addressed from 192.168.1.0 network starting from 100, i.e. first client get 192.168.1.100 second gets 101, etc.

Also the router has some filtering capabilities which allows/disallows access to the internal network.

Hope this helps.

-Santosh

P.S. I just got the same router and its great.

Re: i bought a router recently, i can't telnet from outside

Mark Fenton — Tue, 11 Dec 2001 02:39:11 GMT

Eugene, also note, that you *should* be able to set up NAT via the HTML interface that Santosh referenced.

I have not personnally used the Linksys version, but any decent router should be able to handle such a task.