https://community.hpe.com/t5/operating-system-linux/trying-to-make-my-hp-en-1207d-tx-pci-10-100-fast-ethernet/m-p/2652638#M89833 Hi,<BR />You Can use The Realtek 8139 module i.e, rtl8139.o.<BR /><BR />You will get a message like the following during the boot<BR /><BR />eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0x1400, IRQ 0, 00:10:b5:02:fa:88 <BR /><BR />Pl. insure to turn off PnP OS in your BIOS field.<BR /><BR />This works fine unless there is any IRQ clash.<BR /><BR />Manoj Wed, 30 Jan 2002 05:06:18 GMT Manoj Kumar Sarangi 2002-01-30T05:06:18Z https://community.hpe.com/t5/operating-system-linux/trying-to-make-my-hp-en-1207d-tx-pci-10-100-fast-ethernet/m-p/2652637#M89832 I can't get my card to work with red hat 7.0<BR />card: hp en 1207d-tx PCI 10/100 fast ethernet adapter<BR />can anyone help? Fri, 25 Jan 2002 00:41:19 GMT https://community.hpe.com/t5/operating-system-linux/trying-to-make-my-hp-en-1207d-tx-pci-10-100-fast-ethernet/m-p/2652637#M89832 Kostas Pagratis 2002-01-25T00:41:19Z https://community.hpe.com/t5/operating-system-linux/trying-to-make-my-hp-en-1207d-tx-pci-10-100-fast-ethernet/m-p/2652638#M89833 Hi,<BR />You Can use The Realtek 8139 module i.e, rtl8139.o.<BR /><BR />You will get a message like the following during the boot<BR /><BR />eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0x1400, IRQ 0, 00:10:b5:02:fa:88 <BR /><BR />Pl. insure to turn off PnP OS in your BIOS field.<BR /><BR />This works fine unless there is any IRQ clash.<BR /><BR />Manoj Wed, 30 Jan 2002 05:06:18 GMT https://community.hpe.com/t5/operating-system-linux/trying-to-make-my-hp-en-1207d-tx-pci-10-100-fast-ethernet/m-p/2652638#M89833 Manoj Kumar Sarangi 2002-01-30T05:06:18Z