https://community.hpe.com/t5/operating-system-linux/pavilion-8765c-network-problem-with-redhat7-0/m-p/2514679#M90525 If it is only the network itself that is not accessible, check the settings for that interface (netmask, ip addresses, default gateway etc).<BR /><BR />Can you ping the eth0 interface itself?<BR />Can you do a broadcast ping on the local subnet (ping -b)? Thu, 12 Apr 2001 15:18:48 GMT Nico van Royen 2001-04-12T15:18:48Z https://community.hpe.com/t5/operating-system-linux/pavilion-8765c-network-problem-with-redhat7-0/m-p/2514678#M90524 Hi,<BR /><BR />Do anybody have successfully set up the network card for Pavilion 8765C with Redhat 7.0. I used Linuxconf to set it up (eth0, rtl8139 was used. and i/o port and irq were left empty). It looks fine at booting time, and all the related files look fine too. But I cannot access the network. It says the network is not accessible. The card works fine under Windows Me and Windows 2000. <BR />Any suggestions?<BR /><BR />Regards,<BR /><BR />Bin Fri, 06 Apr 2001 19:18:35 GMT https://community.hpe.com/t5/operating-system-linux/pavilion-8765c-network-problem-with-redhat7-0/m-p/2514678#M90524 Bin Zhu 2001-04-06T19:18:35Z https://community.hpe.com/t5/operating-system-linux/pavilion-8765c-network-problem-with-redhat7-0/m-p/2514679#M90525 If it is only the network itself that is not accessible, check the settings for that interface (netmask, ip addresses, default gateway etc).<BR /><BR />Can you ping the eth0 interface itself?<BR />Can you do a broadcast ping on the local subnet (ping -b)? Thu, 12 Apr 2001 15:18:48 GMT https://community.hpe.com/t5/operating-system-linux/pavilion-8765c-network-problem-with-redhat7-0/m-p/2514679#M90525 Nico van Royen 2001-04-12T15:18:48Z