topic Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA) in Operating System - Linux

Need gcc 2.95.3 depot for 11.31 (both IA & PA)

coolaqua — Fri, 23 May 2008 07:49:14 GMT

Hi,
Does anybody has depot for gcc2.95.3 (for both IA & PA)..?

I downloaded this version for PA from
mirrors(dot)develooper(dot)com/hpux/downloads.html

I did not face any problem in installing this. But when i tried to execute a simple program (Hello World), I got the following error

/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/stdio.h:30: warning: `__va__list' redefined
/usr/include/sys/stdsyms.h:537: warning: this is the location of the previous definition
as: "/var/tmp/ccuXzJda.s", line 22: error 1052: Directive name not recognized - NSUBSPA

I even tried to build the gcc source. But could not. I have attached the build output for your reference..

Please help me to resolve this...

Thanks

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Dennis Handly — Fri, 23 May 2008 11:07:19 GMT

as: "ccuXzJda.s", line 22: error 1052: Directive name not recognized - NSUBSPA

This means you aren't using the foreign devil version of as(1). Possibly gas?

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Steven Schweda — Fri, 23 May 2008 14:05:46 GMT

> Need gcc 2.95.3 [...]

Why? It's almost prehistoric. What's wrong
with any of the more current (and more easily
available) GCC versions?

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Steven Schweda — Fri, 23 May 2008 14:12:28 GMT

> I downloaded this version for PA from
> mirrors(dot)develooper(dot)com/hpux/downloads.html

Really? I don't see a GCC 2.95.3 kit there
for HP-UX 11.31 (which is considerably newer
than GCC 2.95.3, by the way). Oh, I see.
You seem to have gotten the kit for a much
older HP-UX version, and apparently expected
it to work on 11.31. Good luck with that.

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

coolaqua — Mon, 26 May 2008 05:41:19 GMT

@Dennis
Thanks for the info... I am using GNU's assembler -
GNU assembler version 2.17 (ia64-hp-hpux11.23) using BFD version 2.17

@steven
Thanks for your reply...

There is a dependency for gcc-2.95.3 in my application.

I know there is no gcc 2.95.3 kit for 11.31 on that website. As a workaround, first I tried installing the available kit. Then tried to build the code (both activities doen on PA m/c).

Want to know If it is possible to achive what I am trying to...? Pls advice..

Any suggestions/pointers are welcome...

Thanks

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Dennis Handly — Mon, 26 May 2008 06:00:59 GMT

>I am using GNU's assembler -
GNU assembler version 2.17 (ia64-hp-hpux11.23) using BFD version 2.17

The error message seems to be for PA (NSUBSPA) but you are listing an IPF assembler??

The important question is gcc using the gnu assembler?
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1177694

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

coolaqua — Mon, 26 May 2008 11:00:26 GMT

Oops.!! This is the version of 'as' i m using..

GNU assembler version 2.17 (hppa64-hp-hpux11.11) using BFD version 2.17

Thanks

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Dennis Handly — Mon, 26 May 2008 11:28:21 GMT

>This is the version of 'as' I'm using..

This is the version you want to use but you're not.
Compile with -v and see which "as" you are using.

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

coolaqua — Mon, 26 May 2008 11:56:27 GMT

Hi Dennis,
I explicitly mentioned the 'as' path in the command line. Following is the error message I got:

var/tmp/ccYQIASa.s: Assembler messages:
/var/tmp/ccYQIASa.s:2: Error: unknown pseudo-op: `.subspa'
/var/tmp/ccYQIASa.s:3: Error: unknown pseudo-op: `.subspa'
/var/tmp/ccYQIASa.s:5: Error: unknown pseudo-op: `.subspa'
/var/tmp/ccYQIASa.s:6: Error: unknown pseudo-op: `.subspa'
/var/tmp/ccYQIASa.s:14: Error: unknown pseudo-op: `.subspa'
/var/tmp/ccYQIASa.s:37: Error: unknown pseudo-op: `.nsubspa'
/var/tmp/ccYQIASa.s:59: Error: unknown pseudo-op: `.nsubspa'
*** Error exit code 1

Stop.
*** Error exit code 1

Thanks

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Dennis Handly — Mon, 26 May 2008 12:17:17 GMT

>I explicitly mentioned the 'as' path in the command line.
ccYQIASa.s:2: Error: unknown pseudo-op: `.subspa'

Well, this isn't the previous HP's PA as(1) error output. It may be the GNU IPF assembler?

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Steven Schweda — Mon, 26 May 2008 13:36:06 GMT

> There is a dependency for gcc-2.95.3 in my
> application.

So _you_ say. Why? What's so special about
gcc-2.95.3? What, exactly, is the problem
with a newer GCC?

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Peter Nikitka — Mon, 26 May 2008 15:53:19 GMT

Hi,

> There is a dependency for gcc-2.95.3 in my
> application.

Nearly all requests of such type I got are the results of incorrect coding of the application itself, which was uncovered by other compilers (here: perhaps a more recent gcc). Often it's the case when porting to a different platform.

Try an up-to date gcc first.
If it works: done.
Else: you may look for compatiblity options or better check the code of the application.

mfG Peter

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

coolaqua — Tue, 27 May 2008 04:50:53 GMT

Dennis,
In earlier error output, I had used only --with-gnu-as flag. But this time I explicitly mentioned the path of the as --with-as=/opt/hp-gcc64-4.2.1/bin/as

you mean to say I am using IPF version of as...??

Re: Need gcc 2.95.3 depot for 11.31 (both IA & PA)

Dennis Handly — Tue, 27 May 2008 06:50:45 GMT

>you mean to say I am using IPF version of as...??

Possibly. That would explain why it doesn't like those PA directives.