https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183818#M9627 Nope. But the check is done anyway. Reading the docs inside /usr/src/linux/Documentation/scsi would help. Sat, 07 Feb 2004 22:37:25 GMT Ragu_1 2004-02-07T22:37:25Z https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183816#M9625 Does Linux need to see consecutive lun's from lun 0?<BR /><BR />Thanks<BR />Declan Thu, 05 Feb 2004 06:37:51 GMT https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183816#M9625 Declan McCann_2 2004-02-05T06:37:51Z https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183817#M9626 No.<BR /><BR />Edit /usr/src/linux-2.4/drivers/scsi/scsi_scan.c <BR /><BR />Add your specific device info to the following structure: <BR /><BR />static struct dev_info device_list[]<BR /><BR />In the following format:<BR /><BR />{"vendor", "model", "*", BLIST_SPARSELUN | BLIST_LARGELUN},<BR /><BR />Rebuild. Thu, 05 Feb 2004 08:53:42 GMT https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183817#M9626 Bill Wood_3 2004-02-05T08:53:42Z https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183818#M9627 Nope. But the check is done anyway. Reading the docs inside /usr/src/linux/Documentation/scsi would help. Sat, 07 Feb 2004 22:37:25 GMT https://community.hpe.com/t5/operating-system-linux/consecutive-lun-s/m-p/3183818#M9627 Ragu_1 2004-02-07T22:37:25Z