https://community.hpe.com/t5/operating-system-linux/debugging-c-with-wdb-in-multitask-hpux-environment/m-p/3917888#M97067 Hi.<BR />I've tried to debug 1 process with wdb. When I attach wdb to the process it stops the process which is normal. Then any action breaks the inter process communications... It seams it doesn't restart from the point it has been stopped... Do you have any explaination ?<BR />Thanks. Wed, 27 Dec 2006 03:53:58 GMT Rouge_1 2006-12-27T03:53:58Z https://community.hpe.com/t5/operating-system-linux/debugging-c-with-wdb-in-multitask-hpux-environment/m-p/3917888#M97067 Hi.<BR />I've tried to debug 1 process with wdb. When I attach wdb to the process it stops the process which is normal. Then any action breaks the inter process communications... It seams it doesn't restart from the point it has been stopped... Do you have any explaination ?<BR />Thanks. Wed, 27 Dec 2006 03:53:58 GMT https://community.hpe.com/t5/operating-system-linux/debugging-c-with-wdb-in-multitask-hpux-environment/m-p/3917888#M97067 Rouge_1 2006-12-27T03:53:58Z https://community.hpe.com/t5/operating-system-linux/debugging-c-with-wdb-in-multitask-hpux-environment/m-p/3917889#M97068 <P>Do you have any timeouts set? Can you make them longer? Any signals being sent? (A simple tusc run may show them.)<BR /><BR />After you attach, can you immediately continue? Or is it just the presence of wdb that causes the problem?</P> Sat, 22 Oct 2011 19:37:23 GMT https://community.hpe.com/t5/operating-system-linux/debugging-c-with-wdb-in-multitask-hpux-environment/m-p/3917889#M97068 Dennis Handly 2011-10-22T19:37:23Z