https://community.hpe.com/t5/disk/what-s-the-problem/m-p/2554583#M1032 When I connect the drive to a functioning SCSI controller I either get Star Unit failed or Drive connected not ready. Depending on where the motor jumper is set. It's an 18.2 Not-Pluggable drive that was only unboxed and opened on 7/18 Is this a bad drive? I can connect other Ultra 2 drives and they work fine. Model number is 328943-b21 Wed, 18 Jul 2001 23:00:00 GMT Ayman Altounji 2001-07-18T23:00:00Z https://community.hpe.com/t5/disk/what-s-the-problem/m-p/2554583#M1032 When I connect the drive to a functioning SCSI controller I either get Star Unit failed or Drive connected not ready. Depending on where the motor jumper is set. It's an 18.2 Not-Pluggable drive that was only unboxed and opened on 7/18 Is this a bad drive? I can connect other Ultra 2 drives and they work fine. Model number is 328943-b21 Wed, 18 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/disk/what-s-the-problem/m-p/2554583#M1032 Ayman Altounji 2001-07-18T23:00:00Z