https://community.hpe.com/t5/disk/adding-18gb-drive/m-p/2473679#M295 Proliant 3000 <BR />Novell Netware 4.11 <BR />Smart 2/DH Array Controller <BR /> <BR />Currently running Raid5 with 3 18GB Drives in single array(Netware VOL_1). I want to add a single 18GB Drive for a second Netware Volume. I believe I should install the drive, use cpqonlin.nlm to create a second array, and then use install.nlm to create the partition and volume. Is this the correct procedure? Is there a problem with using only one drive in the second array? Please let me know. Thanks for your help in advance. Thu, 14 Dec 2000 00:00:00 GMT Ayman Altounji 2000-12-14T00:00:00Z https://community.hpe.com/t5/disk/adding-18gb-drive/m-p/2473679#M295 Proliant 3000 <BR />Novell Netware 4.11 <BR />Smart 2/DH Array Controller <BR /> <BR />Currently running Raid5 with 3 18GB Drives in single array(Netware VOL_1). I want to add a single 18GB Drive for a second Netware Volume. I believe I should install the drive, use cpqonlin.nlm to create a second array, and then use install.nlm to create the partition and volume. Is this the correct procedure? Is there a problem with using only one drive in the second array? Please let me know. Thanks for your help in advance. Thu, 14 Dec 2000 00:00:00 GMT https://community.hpe.com/t5/disk/adding-18gb-drive/m-p/2473679#M295 Ayman Altounji 2000-12-14T00:00:00Z https://community.hpe.com/t5/disk/adding-18gb-drive/m-p/2473680#M296 There is no problem with using a single drive , on the second Array ( Array B) Run the ACU to configure the drive . Wed, 20 Dec 2000 00:00:00 GMT https://community.hpe.com/t5/disk/adding-18gb-drive/m-p/2473680#M296 Ayman Altounji 2000-12-20T00:00:00Z