topic Re: HVD10 on N -class in Disk

HVD10 on N -class

Peter Godron — Tue, 28 Jan 2003 17:04:14 GMT

I am trying to hook up a HVD10 disk pack( 7 disks) onto a single SCSI connector.
The array has two bus cards (i.e. 4 ports) and I can not get the connection to work. I have tried using bus A and bus B on either card with various DIP switch settings, but nothing seems to work. Is a special cable required? (Doco mentions a 'V'cable, but seems to refer to multiple hosts)

Re: HVD10 on N -class

Eugeny Brychkov — Tue, 28 Jan 2003 17:14:32 GMT

Peter,
make sure controller you're connecting HVD10 to is HVD type, not LVD or SE (HVD and LVD/SE are electrically incompatible)! Post its part/product number here.
Eugeny

Re: HVD10 on N -class

Vincent Farrugia — Wed, 29 Jan 2003 06:57:08 GMT

Hello,

You need A4800A controllers in your N-Class for the HVD10 to work. That is the only HVD card supported on that server.

HTH,
Vince

Re: HVD10 on N -class

Peter Godron — Wed, 29 Jan 2003 10:30:16 GMT

Update:
The product code on the input card of the array is A5616A.
The ioscan lists:
SCSI C895 Fast Wide LVD
and internal disks on SCSI C875 Ultra Wide Single-Ended.

Is it possible to change the card on the back of the array to hook up to the LVD chain?

Re: HVD10 on N -class

Eugeny Brychkov — Wed, 29 Jan 2003 10:59:55 GMT

A5616A is really HVD10 enclosure (not SC10) which has Fast-Wide-Differential HVD interface, and is a replacement for Jamaica enclosures.
You will never get LVD/SE adapter working with HVD10, they are not electrically compatible. You need either SC10 enclosure (which is LVD-type) or HVD/FWD host bus adapter in your server
Eugeny

Re: HVD10 on N -class

Brian M Rawlings — Wed, 29 Jan 2003 23:27:41 GMT

As others have said, you'll need an HVD HBA to drive the HVD10. Vince pointed out the A4800A, a single-port HVD SCSI HBA which has a "HD68" standard 68-ping SCSI connector for your cabling pleasure.

There is also a dual-port A5159A HVD SCSI HBA, which has the smaller form-factor "VHD68" type plugs (very high density, 68-pin). I mention this, because, if you end up ordering a new HBA, you'll want to either know your cables will work, or order the right cables along with the card.

You'll also want the HVD terminator, if you aren't sure what you have: it is C2905A (HD68 style for the HVD10 chassis).

Regards, --bmr

Re: HVD10 on N -class

Vincent Farrugia — Thu, 30 Jan 2003 07:54:23 GMT

Hello,

You didn't tell us how you are connecting the HVD10, or which dip switches are you using.

I assume you are connecting in full-bus mode.

Can you confirm exactly?

HTH,
Vince

Re: HVD10 on N -class

Peter Godron — Thu, 30 Jan 2003 09:09:59 GMT

Many Thanks to ALL of you.
Problem now resolved; New card on order