https://community.hpe.com/t5/disk/raid-controller-on-compaq-7000t-7el/m-p/2892951#M3366 Hi,<BR />Setup; WinME, 768MB Ram, 2 HDD on primary onboard IDE, a DVD and a CDRW on the secondary onboard IDE.<BR />Have just purchased an Ultra ATA 133 raid controller to expand number of IDE units (a new HDD).<BR />The SCSI-controller is listed in the Device Manager as fully functioning.<BR />However, I am not able to access the Raid configure utility at startup, and my PC lock trying to list the devices connected.<BR />Question; does my mobo support Ultra ATA 133?, is there something obvious (or not so obvious) that I can do to rectify and be able to start using my new HDD? Thu, 30 Jan 2003 12:52:48 GMT Coach Bakken 2003-01-30T12:52:48Z https://community.hpe.com/t5/disk/raid-controller-on-compaq-7000t-7el/m-p/2892951#M3366 Hi,<BR />Setup; WinME, 768MB Ram, 2 HDD on primary onboard IDE, a DVD and a CDRW on the secondary onboard IDE.<BR />Have just purchased an Ultra ATA 133 raid controller to expand number of IDE units (a new HDD).<BR />The SCSI-controller is listed in the Device Manager as fully functioning.<BR />However, I am not able to access the Raid configure utility at startup, and my PC lock trying to list the devices connected.<BR />Question; does my mobo support Ultra ATA 133?, is there something obvious (or not so obvious) that I can do to rectify and be able to start using my new HDD? Thu, 30 Jan 2003 12:52:48 GMT https://community.hpe.com/t5/disk/raid-controller-on-compaq-7000t-7el/m-p/2892951#M3366 Coach Bakken 2003-01-30T12:52:48Z