https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910902#M3483 expound on your installation. 2 IDE drives now?<BR />How attached to IDE cable? Master/Slave? Sun, 23 Feb 2003 13:01:43 GMT e4services 2003-02-23T13:01:43Z https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910901#M3482 I am trying to tranfer maxtor hard drive from win98 computer to new hp 753n. I have tried everything I can think of but cannot get the hp to recognize the second hard drive. I would appreciate any help with this matter.... Sat, 22 Feb 2003 19:10:44 GMT https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910901#M3482 PJM_1 2003-02-22T19:10:44Z https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910902#M3483 expound on your installation. 2 IDE drives now?<BR />How attached to IDE cable? Master/Slave? Sun, 23 Feb 2003 13:01:43 GMT https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910902#M3483 e4services 2003-02-23T13:01:43Z https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910903#M3484 Original seagate hard drive on hp 753n (80 gb) connected as master, (black connector)with jumpers set to cable select.<BR />Older hard drive, maxtor 60 gb, trying to connect as slave, (grey connector). <BR /><BR />I set jumpers in every combination. None worked. It is presently running on a dell, running windows 98, with the jumpers set horizontly on top row middle pins. No where is this configuration shown, but this is how it has been working for a year or two. Sun, 23 Feb 2003 16:53:09 GMT https://community.hpe.com/t5/disk/adding-second-hard-drive/m-p/2910903#M3484 PJM_1 2003-02-23T16:53:09Z