https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481532#M393 What version of Windows? If you are talking NT... the boot partition is limited to that size, I believe... if 95OSR2 / 98, format in FAT32. If you want NT-style stability, use WIN2K, or use 2 partitions... Tue, 23 Jan 2001 00:00:00 GMT Ayman Altounji 2001-01-23T00:00:00Z https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481531#M392 I am attempting to install a compaq ultra wide scsi 3 18.2 drive in a non compaq PC using a sca scsi converter but although the bios is recognoising the correct hard drive type windows reports the hard drive size as 4 GB not 18.2 GB. Anybody have a similar problem or any possible solutions Thu, 11 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481531#M392 Ayman Altounji 2001-01-11T00:00:00Z https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481532#M393 What version of Windows? If you are talking NT... the boot partition is limited to that size, I believe... if 95OSR2 / 98, format in FAT32. If you want NT-style stability, use WIN2K, or use 2 partitions... Tue, 23 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481532#M393 Ayman Altounji 2001-01-23T00:00:00Z https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481533#M394 Actually - the OS is Win2K (based on his message), but what controller is involved? Tue, 20 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk/incorrect-drive-size/m-p/2481533#M394 Ayman Altounji 2001-02-20T00:00:00Z