https://community.hpe.com/t5/disk/boot-from-scsi-device-1-change-from-device-0/m-p/3145903#M4451 I would think so, as long as you've installed W2K on that drive.<BR /><BR />-Josh Tue, 16 Dec 2003 16:24:41 GMT Joshua Scott 2003-12-16T16:24:41Z https://community.hpe.com/t5/disk/boot-from-scsi-device-1-change-from-device-0/m-p/3145902#M4450 I added another Ultra320 disk in external enclosure connected to onboard SCSI controller.<BR /><BR />I would like to boot (MS Server 2000) from this device (SCSI ID 4). Can I just change that in the HP bios to boot from device 1 opposed to device 0?<BR /><BR />Thanks,<BR /> Tue, 16 Dec 2003 10:10:37 GMT https://community.hpe.com/t5/disk/boot-from-scsi-device-1-change-from-device-0/m-p/3145902#M4450 David Schultze 2003-12-16T10:10:37Z https://community.hpe.com/t5/disk/boot-from-scsi-device-1-change-from-device-0/m-p/3145903#M4451 I would think so, as long as you've installed W2K on that drive.<BR /><BR />-Josh Tue, 16 Dec 2003 16:24:41 GMT https://community.hpe.com/t5/disk/boot-from-scsi-device-1-change-from-device-0/m-p/3145903#M4451 Joshua Scott 2003-12-16T16:24:41Z