HVD10 and SC10

Muhammad Jahangir Mirza — Fri, 06 Aug 2004 04:05:21 GMT

Hi
Hi,
1.I like to know i have different kinds of disk systems like SC10, FC10, DS2300 and HVD10 im im going to use in full bus mode kindly tell me how to configure this disksystems.
2.Another thing i like to know if the harddisk is going to be faulty we all know the led shows which one is faulty by the hardware and from IOSCAN we can see as well (NO_hardware)but in the disksystem it cant show any led except the disksystems led not the harddisk LED kindly tell me how to know which harddisk is faulty

Please reply me at jahangir@mushko.com
Im very thankful to all you if you can help about this problem and also need to know as well.
thnks
Best Reagrds
Muhammad Jahangir Mirza

Re: HVD10 and SC10

Shaikh Imran — Fri, 06 Aug 2004 04:47:15 GMT

Hi,
1)
Hi first of all the devices you are using are
JBOD(Just bucnh of Disks).
The eaxct full or split bus configuration will be from the controller which you are going to use with them.
For example for SC10 we use FC60 as the controller & configure the full or split BUS
from there.
Anyways you can find the info's regarding these here:
For DS2300
http://www.hp.com/products1/evolution/e3000/download/52430406b.pdf
FC10&SC10
http://www.nasi.com/hp_SC10.htm
For HVD10
http://www.clientsystems.com/products/pdf/surestore_hvd10.pdf

2)
You will come to know by the array manager utility the exact ID with the channel number of the faulty disk which is available on HPUX.
command will be
amutil or amdsp see man pages for more info.

Regards,

topic HVD10 and SC10 in Disk

HVD10 and SC10

Re: HVD10 and SC10