https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052052#M8151 Each half is a seperate bus and need to be terminated (or connected). Sat, 09 Jun 2007 04:39:50 GMT Torsten. 2007-06-09T04:39:50Z https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052050#M8149 I am installing a Jamaica (JBOD). I see on the back of the JBOD there are 4 SCSI ports. The bottom 2 SCSI ports are going to be connected to 2 seperate servers. What needs to be done with the top 2 SCSI ports? Do they need "null terminators" (I think that is what they are called)?<BR /><BR />You help will be appreciated. I will assign points.<BR /><BR />GBR Fri, 08 Jun 2007 15:13:11 GMT https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052050#M8149 GBR 2007-06-08T15:13:11Z https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052051#M8150 Yes, they definitely need terminators on them. If you don't have it terminated, your connection might kinda sorta work. Fri, 08 Jun 2007 15:45:16 GMT https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052051#M8150 Patrick Wallek 2007-06-08T15:45:16Z https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052052#M8151 Each half is a seperate bus and need to be terminated (or connected). Sat, 09 Jun 2007 04:39:50 GMT https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052052#M8151 Torsten. 2007-06-09T04:39:50Z https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052053#M8152 Thanks. Tue, 12 Jun 2007 06:55:10 GMT https://community.hpe.com/t5/disk/jbod-terminator/m-p/5052053#M8152 GBR 2007-06-12T06:55:10Z