Secure Path 3.0A for Linux with SAN Array 1000

Abbes Bettahar — Fri, 19 Dec 2003 08:53:50 GMT

Hi,

I installed Linux Redhat Enterprise ES 2.1 on a HP Proliant server and I connected it with a HP Storage SAN Array 1000 by fiber adapter FCA2214 DC PCI-X.

I succeeded to configure and create the volumes in the SAN Array 1000.

Operating system : Linux Redhat Enterprise ES 2.1

Kernel : 2.4.9-e30smp

Libraries : glibc-2.2.4-31.7 and libgcc-3.2.2-5

My problem is:

When I try to install the Secure Path 3.0A for Linux package in my Proliant server, I can't install it.

Then I need some help please. Is it problem with software, kernel or libraries requirements or with anything else?

Abbes

Re: Secure Path 3.0A for Linux with SAN Array 1000

Peter Mattei — Mon, 22 Dec 2003 03:54:44 GMT

Hi,

These are the red Hat Linux releases supported by SecurePath 3.0A and 3.0B:
Red Hat Enterprise Linux 2.1 AS, Errata Kernel 2.4.9-e25-smp, 2.4.9-e27-smp, 2.4.9-e25 enterprise, 2.4.9-e27 enterprise

Find this info in the Release Notes on: http://www.hp.com/go/securepath and select "technical documentation".

If you want to go to 3.0B go here: http://h18006.www1.hp.com/products/sanworks/softwaredrivers/securepath/splinuxv30b.html

So looks like yor kernel is not on the list yet!

Sorry
Peter

topic Secure Path 3.0A for Linux with SAN Array 1000 in Disk Enclosures

Secure Path 3.0A for Linux with SAN Array 1000

Re: Secure Path 3.0A for Linux with SAN Array 1000