https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152935#M10653 hello,<BR /><BR />i have a smart array 3200 controller in a proliant 5500 server. the array is configured as a raid 5 and no OS is installed as of yet. i would like to reconfigure the raid array before installing an OS. can this be done without a smartStart CD? and if so, how.<BR /><BR />tony Sun, 28 Dec 2003 17:46:32 GMT me_20 2003-12-28T17:46:32Z https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152935#M10653 hello,<BR /><BR />i have a smart array 3200 controller in a proliant 5500 server. the array is configured as a raid 5 and no OS is installed as of yet. i would like to reconfigure the raid array before installing an OS. can this be done without a smartStart CD? and if so, how.<BR /><BR />tony Sun, 28 Dec 2003 17:46:32 GMT https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152935#M10653 me_20 2003-12-28T17:46:32Z https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152936#M10654 Hi tony,<BR /><BR />I am afraid you need to install a bois like software for the array controller. This software can be found on the smartstart CD but it can also be found on the web.<BR /><BR /><A href="http://h18023.www1.hp.com/support/files/server/us/index.html" target="_blank">http://h18023.www1.hp.com/support/files/server/us/index.html</A><BR /><BR />Gideon Mon, 29 Dec 2003 18:42:16 GMT https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152936#M10654 G. Vrijhoeven 2003-12-29T18:42:16Z https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152937#M10655 Hi!<BR />When server boot on Smart Arrey message push "F8", and in raid bios config you array. Thu, 22 Jan 2004 06:06:48 GMT https://community.hpe.com/t5/disk-enclosures/help-please/m-p/3152937#M10655 Yuriy Tsyutsyak 2004-01-22T06:06:48Z