virtual array info from ioscan/stm info

Ross Hansen — Fri, 13 Feb 2004 13:58:05 GMT

is there anyway to get the physical disk contenets of virtual arrays - I can't get the system to report on anything past the fibre connection?

Ross

Re: virtual array info from ioscan/stm info

James A. Donovan — Fri, 13 Feb 2004 15:00:34 GMT

To get information on the physical configuration of your VA array, you'll need to use the CommandView utilities.

"armdsp -a " will show the entire configuration

---- The default syntax for identifying the is:
[:] where is used to access the array
on host . can be either a DNS name or the IP
address of the host, and can either be the Serial Number,
Alias Name, World Wide Name or the Device Path of the array.

topic Re: virtual array info from ioscan/stm info in Disk Enclosures

virtual array info from ioscan/stm info

Re: virtual array info from ioscan/stm info