https://community.hpe.com/t5/disk-enclosures/suspend-mode-for-smart-array-5i-controller/m-p/3195263#M11136 Hi,<BR />I'm running the Smart Array 5i Controller on ProLiant DL380 G2 with Linux. Is there a way to get the RAID manually to suspend mode? I installed the Array Configuration Utility (v7.0.1.0), but there you can't do this job. I looked for some commandline tools, but it seems there are no out.<BR /><BR />Thanks in advanced,<BR />Tobias Wed, 18 Feb 2004 06:50:53 GMT Tobias Ruhe 2004-02-18T06:50:53Z https://community.hpe.com/t5/disk-enclosures/suspend-mode-for-smart-array-5i-controller/m-p/3195263#M11136 Hi,<BR />I'm running the Smart Array 5i Controller on ProLiant DL380 G2 with Linux. Is there a way to get the RAID manually to suspend mode? I installed the Array Configuration Utility (v7.0.1.0), but there you can't do this job. I looked for some commandline tools, but it seems there are no out.<BR /><BR />Thanks in advanced,<BR />Tobias Wed, 18 Feb 2004 06:50:53 GMT https://community.hpe.com/t5/disk-enclosures/suspend-mode-for-smart-array-5i-controller/m-p/3195263#M11136 Tobias Ruhe 2004-02-18T06:50:53Z