migration from raid 1 to raid 5

chris tran — Mon, 23 Feb 2004 00:53:17 GMT

Does Raid Controller 1M support migration from Raid Level 1 to Raid Level 5 without destroying any data?

Re: migration from raid 1 to raid 5

amhakassa — Mon, 23 Feb 2004 12:25:26 GMT

Hi Chris,

yes it does. However, it is a good idea to make a good back up of your data first (Just in case some iconvinience happen)

regards
Amha Kassa

Re: migration from raid 1 to raid 5

amhakassa — Mon, 23 Feb 2004 12:47:14 GMT

Hi Chris,

You might need to have Netraid Assistant for winodws operating system or if you have Netware you need Megamanager. You can download that from this link depending on what kind of operating system you have

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=51917&taskId=135&prodTypeId=329290&prodSeriesId=51915〈=en&cc=us

1. Selecet you Operating system
2. Download the Utility under "Software Storage Controller" (If windows 2000, it will be under Microsoft Windows 2000 server)
3. Unzip the download to a folder and install it by double clicking setup in that folder
Once you got Netraid aassistant installed here is the link which containes the steps on how to migrate the raid level in Microsoft Windows
http://isupport2.hp.com/Solution.asp?id=IS2948

It is pritty much the same if you have netware too

regards
Amha Kassa

topic migration from raid 1 to raid 5 in Disk Enclosures

migration from raid 1 to raid 5

Re: migration from raid 1 to raid 5

Re: migration from raid 1 to raid 5