https://community.hpe.com/t5/disk-enclosures/hsv100-block-size/m-p/3204162#M11269 Is it possible to change block size on HSV100 based storage (EVA3000) as it's on HSG80 (MA8000)? Fri, 27 Feb 2004 05:32:45 GMT Darius Rudzika 2004-02-27T05:32:45Z https://community.hpe.com/t5/disk-enclosures/hsv100-block-size/m-p/3204162#M11269 Is it possible to change block size on HSV100 based storage (EVA3000) as it's on HSG80 (MA8000)? Fri, 27 Feb 2004 05:32:45 GMT https://community.hpe.com/t5/disk-enclosures/hsv100-block-size/m-p/3204162#M11269 Darius Rudzika 2004-02-27T05:32:45Z https://community.hpe.com/t5/disk-enclosures/hsv100-block-size/m-p/3204163#M11270 No, I don't think so - at least I have never heard about it. Remember that this would affect all disks within a disk group (up to 56 on the EVA-3000, up to 240 on the EVA-5000). I bet the segment size (2 MBytes) is hard-coded. Fri, 27 Feb 2004 05:40:39 GMT https://community.hpe.com/t5/disk-enclosures/hsv100-block-size/m-p/3204163#M11270 Uwe Zessin 2004-02-27T05:40:39Z