https://community.hpe.com/t5/disk-enclosures/ra4100/m-p/3210712#M11326 I Compaq proliant 8500 and connected to external RAID RA4100 controller via Firbre channel (primary and secondary). For some reason, I get this error...<BR />The compaq RA4000 controller RAID array cannot be configured by this program. possible causes<BR /><BR />- A hardware failure occured<BR />- This utility is being run on the backup server of a cluster server configuration<BR /><BR />The second sound more like it, but I did do system erase and still get the message. How do I reset? I also tried the system erase with - fibrechannel option and it says, this version of erase does not support -fibrechannel option. What do I do?<BR />Thanks in advance.<BR />Roshan Fri, 05 Mar 2004 10:56:54 GMT ranthony 2004-03-05T10:56:54Z https://community.hpe.com/t5/disk-enclosures/ra4100/m-p/3210712#M11326 I Compaq proliant 8500 and connected to external RAID RA4100 controller via Firbre channel (primary and secondary). For some reason, I get this error...<BR />The compaq RA4000 controller RAID array cannot be configured by this program. possible causes<BR /><BR />- A hardware failure occured<BR />- This utility is being run on the backup server of a cluster server configuration<BR /><BR />The second sound more like it, but I did do system erase and still get the message. How do I reset? I also tried the system erase with - fibrechannel option and it says, this version of erase does not support -fibrechannel option. What do I do?<BR />Thanks in advance.<BR />Roshan Fri, 05 Mar 2004 10:56:54 GMT https://community.hpe.com/t5/disk-enclosures/ra4100/m-p/3210712#M11326 ranthony 2004-03-05T10:56:54Z